Brembo 6 piston custom brake kit (for BMW e8x, e9x OEM 360mm, 380mm rotors)




In our kits we are using only brand new calipers, which fits from factory on gm cars, like corvettes and camaros.
This calipers have lug mounts from the factory, so they can’t be fitted on other cars with simple and beauty mounts, like other aftermarket calipers which have radial mounts.
So, we make our lug mount to radial modification for this calipers on our CNC milling machine, which guaranteed excellent result every time.

After modification done, all calipers goes thru sandblasting and then new respraying to any customers color choice.
At the end we are getting very beauty and usable calipers:

  • Which have 190mm pads length – to understand calipers size, you can compare it for example with most competitors 6 pot calipers, which are smaller and have only 152mm long pads.
  • One caliper weights only 3.3kg (7.25lbs) after mod done.
  • This caliper uses very common pads form factor, so you can choose any pads height, you want for the best setup. You can take smaller height pads, 47mm or 57mm for 2 piece light weight rotors, like used in the kits. Or you can use 65mm pads, for excellent fit on oem m3 floating rotors. You can even take 76mm pads, for widest rotors, like 380mm rotors from f8x series.
  • You can change pads without caliper removing- only center pin needs to be removed.
  • Calipers have dust boots, so they work excellent even in everyday use.
  • Overall pistons area very similar to most oem setups, so you don’t get any problems when fitting them.

For E8x and E9x cars we are making kits for using with oem 1m/m3 floating rotors 360mm. This rotors works very well, but only needs good caliper for the best result. This setup can be used in almost any 18 inch wheels for this setup.

You can also use 380mm floating rotor from f8x series, but you’ll have 19 inch minimal rim size. You can fit this setup in 18 inch wheels, but with only some special rim models, like apex ec-7 for example.


Only lightest components, as always:

  • One caliper weights only 3.3kg (7.25lbs).
  •  350 gram per bracket (typical aluminum bracket weight 600-700 gram, and steel even more!)

All components made from aircraft aluminum and then anodized in black.


This kit consists from:

  • Pair of new calipers (in any color you choose)
  • Pair of lightweight brackets – made from aircraft aluminum and anodized in black.
  • Pair of braided brake hoses (goodridge components).


We paint rotors in color by choice. Select one of standard or pick your own at no charge.

We not using powdered coat because it didn’t got this so fine finish. Only white logo change color in extreme conditions (when you go few sessions continuously), main color tone changed very little. there are no problems like that on black logo.

Check fresh video after one season on track with our front brakes (yellow with black logo) with Ti plates.

Additional information

Caliper Color

Blue, Custom, Gray, Red, Yellow

Front rotor size

380mm x 34 mm

Kit contents

2 pc. braided brake hoses, 2 pc. lightweight anodized brackets, 2pc. calipers

Pad heigth

47mm, 57mm, 65mm, 76mm

Pad length


Brake rotor fit

360mm, 360mm, 380mm – Universal, 380mm


Aaircraft aluminum, Brand new original Brembo calipers

BMW car type

M, non M


There are no reviews yet.

Be the first to review “Brembo 6 piston custom brake kit (for BMW e8x, e9x OEM 360mm, 380mm rotors)”